BLITZ Mini F7 V1.1 FC (Gyro:BMI270)

  • Sale
  • Regular price €62,95
Tax included. Shipping calculated at checkout.


Top Features:

- Improved circuit design, better components and lower electrical noise!

- DJI HD VTX Connector (Plug-and-Play / No soldering required)

- FC indicator LEDs for visual debugging


- 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000.


  • MCU:   STM32 F722
  • Gyro:   BMI270
  • Barometer:  DPS310
  • OSD Chip:   AT7456
  • Flash:   16MB (Blackbox flash)
  • UARTS:   6
  • Motor outputs:   4x (SH1.0 connector)
  • I2C serial:   SDA / SLA pads
  • Smartaudio / IRC Tramp VTX protocol supported
  • LED controller:   Yes
  • Beeper pad:   Yes
  • Firmware target:   IFRC-IFLIGHT_BLITZ_F722
  • Mount pattern:   20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
  • Dimensions:   30.5x27 mm
  • Weight:   5g

Wiring suggestion:

- UART 1 for VTX HD / Analog

- UART 2 for a Receiver

- UART 3/4/5 for GPS or other sensors that require a serial port

- UART 6 for ESC Telemetry


  1. F722 MCU has an inner inverter.
  2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX,we suggest you connect to Uart_RX2
  3. Frsky SmartPort,Tramp & Smartaudio can be connected to any unused UART_TX,we suggest you connect to Uart_TX1
  4. F.port can be connected to any unused UART_TX,we suggest you connect to Uart_TX2

Included Connectors (Plug-and-Play wire harness):

- 1x SH1.0 - 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1/5V/G/VI)

- 1x SH1.0 - 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)

- 1x SH1.0 - 6pin connector for any Receiver or DJI(3V3/R2i/5V/G/R2/T2)

- 1x SH1.0 - 4Pin connector GPS (T4/R4/G/5V)

- 1x SH1.0 - 4Pin connector LED & Beeper (BUZ/LED/G/5V)

What's in the package?

1 x BLITZ Mini F7 V1.1 Flight Controller

1 set of FC connectors (as above)

1 set silicon grommets