The Story Behind the Nord25 – And My Current Betaflight Tune
Share
The Story Behind the Nord25 – And My Current Betaflight Tune
The Nord25 was never supposed to exist.
At least, not as a drone frame designed by me.
It all started when I became interested in the Kayoumini, a small 2.5-inch FPV freestyle drone that looked very close to what I wanted to fly. Small, lightweight, and capable of proper freestyle without needing the space of a larger drone.
I liked the concept so much that I wanted to bring it to the NordFPV shop.
From the Kayoumini to the Nord25
My original plan was pretty simple: get in touch with the people behind the Kayoumini, arrange to stock the frame, and make it available to customers.
I tried contacting the manufacturer and the designer through different channels, but unfortunately, I never received an answer.
After several attempts, I started thinking about another possibility.
What if I designed my own frame?
There was just one small problem. I'm not a 3D CAD designer!
I've done some basic 3D design work for printed FPV accessories, but designing a carbon frame that needs to survive freestyle flying was something completely different.
Still, I decided to give it a try.
Designing a frame I actually wanted to fly
From the beginning, I had a pretty clear idea of what I wanted.
A lightweight 2.5-inch freestyle frame that could carry a digital FPV system without becoming unnecessarily heavy. Something small enough to fly in places where I wouldn't normally take a 5-inch drone, but still powerful and responsive enough for proper freestyle.
I also wanted to keep the design simple.
Since I don't have a background in mechanical engineering, I asked a friend who does to help me review the design.
His experience was really valuable, especially when deciding where the frame needed strength, where we could save weight, and how to find a reasonable balance between durability and weight.
One of those decisions was to use a 2.5 mm bottom carbon plate.
Other small freestyle frames use thicker carbon, and there's certainly an argument for doing that. But thicker carbon also means additional weight, and on a small drone, every gram matters.
I wanted to see how far we could go with a lighter design without making the frame too fragile.

More revisions than I expected
I think I went through something like five to seven digital revisions before I was ready to send the design for CNC cutting.
And even then, it wasn't finished.
I ended up making three physical prototypes, spending around three months testing each one before moving on to the next.
During that process, I changed quite a few things.
The arms were adjusted, the overall frame length changed, and I experimented with the size, shape, and number of cutouts. I wanted to save weight and allow airflow without compromising too much on rigidity.
I also learned that designing something that works isn't quite the same as designing something that's easy to manufacture.
Some of the original motor mounting holes made CNC cutting more complicated, so I simplified the design and standardized on four-screw motor mounting.
Other holes and small details were adjusted to make the frame quicker and less expensive to produce.
None of these changes were particularly exciting on their own, but together they made a difference.
I was learning quite a lot along the way!
Then came the flying
Of course, designing the frame was only half the job.
I needed to find out how it behaved in the air, and more importantly, how well it survived the kind of flying I enjoy.
Over the months, I flew the different prototypes as much as I could. Freestyle, tight spaces, quick direction changes, and plenty of crashes.
That testing helped me decide which changes were worth keeping and which ones weren't.
The final design uses a one-piece bottom plate, which means the arms aren't individually replaceable. If you break one, you need to replace the bottom frame.
That's a compromise I accepted to keep the frame simple and lightweight. I've also tried to keep the replacement frame reasonably priced, because crashes are part of freestyle.
After almost a year of flying the Nord25, I finally managed to break an arm when I hit a lamp while flying fast over concrete.
It was a hard crash, so I wasn't particularly surprised!
For me, that experience reinforced that the 2.5 mm carbon had been a reasonable choice. It doesn't prove that thinner carbon is always as durable as thicker carbon, but it has worked well for the way I fly.

My current Nord25 digital tune
Now, here's something I want to be clear about: I'm not particularly good at tuning FPV drones.
I understand what I like when flying, and I can usually tell when something doesn't feel right, but properly tuning a drone in Betaflight is a different skill.
Fortunately, I have some good people around me who know a lot more about this than I do.
With their help, including a remote tuning session, we worked on getting the Nord25 to fly the way it does today.
I could test the drone, explain how it felt in the air, and share the results. They helped me understand which settings needed adjusting and what we should try next.
I'm really happy with how the digital Nord25 flies now, and I wanted to share those settings with anyone building one.
I wouldn't call this the ultimate Nord25 tune. It's simply the configuration I'm currently using, developed with help from people who know their way around Betaflight much better than I do.
Hopefully, it gives you a good starting point.
The build this tune is based on
Frame: Nord25
VTX: DJI O4 Wide
Motors: T-Motors M1103 8000Kv
AIO: JHEMCU F411
Betaflight version: 2026.6.2
PID settings

Filter settings

Rates

Keep in mind that different motors, propellers, batteries, and components can affect how the drone behaves. Even with the same hardware, you might prefer a different feel.
I'd recommend saving your current Betaflight configuration before experimenting with these settings, and checking motor temperatures when testing changes.
And if you're better at tuning than I am, perhaps you'll find ways to improve it even further!
What's next for the Nord25?
The Nord25 started as a personal project because I couldn't get hold of a frame I wanted to stock.
It has since become one of my favorite drones to fly, and seeing other pilots build their own versions has been one of the most enjoyable parts of the project.
I'm still experimenting with components, tuning, and different ways of building it. That's part of what makes FPV fun for me.
If you're building a Nord25, I hope this article gives you a little background on where it came from and helps you get started with the tuning.
And if you've found settings that work particularly well, I'd love to hear about them. There's always something new to learn from other pilots.
You can find the frame, recommended components, and build information on the Nord25 page.
Happy flying!
NordFPV