GEPRC Smart 35 frame
GEP-ST35 it's designed with multiple mounting holes, in order to accept different FC and VTX. Similarly it's possible to install 8mm-13mm hole size motor.
GEP-ST35 is elaborately designed by geprc team, with small size, lightweight and excellent flight performance.
- Brand name: GEPRC
- Model: GEP-ST35
- Wheelbase: 155mm
- Top Plate: 2.0mm
- Bottom Plate: 4.0mm
- Arm Plate: 4.0mm
- Reinforced arm: 2.5mm
- FC mounting holes: 26.5mmx26.5mm/20mmx20mm
- VTX mounting holes: 20mmx20mm
- Motor mounting holes: 9mmx9mm/12mmx12mm
- Size: 142mmx118mmx36mm
- Weight: 47.9g (With 3D prints and reinforced Arm)
- Small size, light weight, and good flight experience.
- 4mm Arm can also be equipped with 2mm reinforced arm, ultra-high strength fuselage, the Strength rised to a higher level.
- There are a number of installation holes for FC and VTX.
- The motor with 8mm-13mm hole spacing can be installed.
- The mount of GoPro camera is designed to install GoPro Hero 8 naked camera and Insta 360 Go2 camera.
- 1 x Top Plate
- 1 x Bottom Plate
- 2 x Camera mounting Plate
- 2 x Front reinforced Plate
- 2 x Ear reinforced Plate
- 6 x M2 * 4.0×25 aluminum columns
- 2 x M2 * 4mm cup head screws
- 20 x M2 * 6.5mm round head screws
- 8 x M2 * 7mm round head screws
- 18 x M2 * 9mm round head screws
- 4 x M2 * 12mm cup head screws
- 1 x M2 * 16mm cup head screws
- 4 x M2 * 18mm cup head screws
- 4 x M2 * 25mm cup head screws
- 4 x M2 * 4mm damping rings
- 8 x M2 * 6.5mm damping rings
- 2 x M2 Nylon shims
- 1 x M2 Rivet nuts
- 4 x M2 Nylon Nuts
- 4 x M2 Lock Nuts
- 1 x VTX antenna mount
- 1 x TBS NanoRX antenna mount
- 1 x Naked camera mount
- 1 x Battery pad
- 1 x EVA landing pad
- 1 x Battery strap (M15 * 200mm)
- 1 x Screwdriver (1.5mm)
- 1 x Antenna fixing tubes
- 4 x Motor wire protection tubes (35mm)