MAMBA Stack F722 MK3 55A F55_128K 6S

  • Sale
  • Regular price 1.090,00 kr
Tax included. Shipping calculated at checkout.
This product is available


MAMBA Stack F722 MK3 50A 6S 32bit (NO WIFI)

Diagram Link From Help Centre Link


  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V


  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%


  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

    FC Specifications

    MAMBA Basic F722MK3
    MCU: 216MHz STM32F722RET6
    GYRO: MPU6000
    Barometer: Yes
    OSD: Yes
    Blackbox: 16M Flash Memory
    Uarts: 6Set
    ESC Soft: Dshot300/600
    ESC Telemetry: Yes
    Power Led: Yes
    LED Controller: BF LED/MB LED(4 Set 2812 LED)
    S/F.Port: Yes
    RSSI: Yes
    Buzz: Yes
    Input: 3~6S Lipo (12.6~25.2V)
    TVS Protection: Yes
    BEC:3.3V 0.5A& 5V 3A (System Power)&
    5V 3A(LED)& 9V 3A
    MOUNTING: 30.5mm, M3

    ESC Specifications

    MAMBA 55A F55_128K
    INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
    BEC: No

    Target:BLHeli_32 MAMBA  F55_128K
    SOFT: Dshot300/600/1200
    TVS Protection: Yes
    MOUNTING: 30.5mm/M3

    In the box :
    High Frequency 470uF/35V ×1
    8pin sh1.0 ×2
    12AWG 100mm ×2
    AMASS Original XT60