Skip to product information
1 of 6


Happymodel Mobula6 2024 1S 65mm (ELRS) V2

Happymodel Mobula6 2024 1S 65mm (ELRS) V2

Regular price €142,95 EUR
Regular price Sale price €142,95 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
Super light 1S 65mm Brushless whoop only 17.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
FX17-B 1/3 CMOS 800TVL Camera awesome footage
Smooth and powerful
Compatible for 1S Lipo/LIHV

Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g
V1.0 version with SuperX ELRS V1.0 AIO
V2.0 version with SuperX ELRS V2.0 AIO
The only difference is v2.0 AIO FC comes with motor plug but V1.0 AIO FC is no motor plug.

Package includes:

Item Name Qty
Mobula6 2024 1S 65mm whoop Drone Frame +Canopy 1
SuperX ELRS AIO 5-IN-1 Flight controller 1
SE0702 KV28000 brushless motor 4
Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw) 1
FX17-B 1/3 CMOS 800TVL camera NTSC 4:3 1
Onboard 5.8G 25mw~400mw VTX 1
Spare canopy 1
Propeller disassemble tool 1
Screw driver 1


Spare parts specifications:

Motor Mode: SE0702 KV28000
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
No.of Cells(Lipo):1S only
Propellers Materials: PC
Inch: 31mm
Pitch: 0.8 in
Weight: 0.21g
Mount hole diameter:  1mm
Flight controller SuperX ELRS AIO 5-IN-1 Flight controller
Sensor:BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
Built-in UART ExpressLRS v3.0.0
Built-in voltage meter sensor , voltage meter scale 110
Built-in current meter sensor , current meter scale 1175
Onboard 4in1 ESC Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay v0.19.2
Default protocol: DSHOT300
Recommend ESC Startup power value to min1100/max1200
Onboard Serial ExpressLRS receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire antenna
Telemetry output Power: <12dBm
Receiver protocol: Serial_based CRSF
Compatible with ExpressLRS V3.x.x TX Module
Could flash single ELRS receiver firmware by Wifi
ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx
Onboard 5.8g VTX Firmware version: OPENVTX
PIT Mode support
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL
FX17-B Camera Model:FX17-B
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
FOV 150°
Signal System: NTSC
Net Weight: 1.5g
Dimensions: L14mm*W14mm*H13mm

    View full details